Product Introduce
CNHTC HOWO 10000 Liters Suction Sewerage Septic Tank Sewer Cleaning Vacuum Sewage Truck Hot Sale
Product Pictures
The cleaning and suction truck is also called a combined dredging truck. This vehicle is a new type of sanitation vehicle that combines the functions of a high-pressure cleaning truck and a suction truck. The highlight of this vehicle is to dredge the blocked area of the sewer that cannot be reached by manpower, so it is called a combined dredging vehicle. Other functions of this vehicle are floor washing, suction and drainage, landscaping, etc.
Sewage suction part:
1. Function: The special part of the suction truck consists of a power take-off, a transmission shaft, a vacuum suction pump, a pressure tank, a hydraulic part,a pipe network system, a vacuum pressure gauge, a feces viewing window, a hand washing device, etc. The vehicle is equipped with a high-power vacuum suction pump and a high-quality hydraulic system. The tank head is die-cast once, the tank can be opened from behind, and the double top is self-unloading. The dirt in the tank can be directly dumped through the rear cover, with high vacuum (greater suction than the fecal suction truck), large tonnage, high efficiency and wider application;
2. Working principle: The vehicle is started, the power take-off is hung, and the sewage suction pump is driven. The sewage suction pump operates to extract the air in the sewage tank.
Since the sewage suction hose is always immersed in the liquid surface, the air in the sewage tank is sucked out and becomes thinner and thinner because it cannot be replenished, causing the pressure in the tank to be lower than the atmospheric pressure. The sewage enters the tank through the sewage suction hose under atmospheric pressure;
High-pressure cleaning part:
1. Function: The blocked pipe is flushed open by the strong pressure generated by high-pressure water flow. The main components are tank body, high-pressure pump, hydraulic system, etc. High-pressure cleaning vehicles are mainly used to clean urban sewers, sediments in pipelines, and dredge dead corner mud ditches. They can also be used to clean industrial drainage pipelines, walls, etc., and clean roads and square floors.
2. Working principle: The vehicle starts, the sandwich power take-off is hung, and the high-pressure pump is driven. The water is pressurized to hundreds of atmospheres through the high-pressure water generating device, and then converted into high-speed fine jet water through the small-aperture injection device. The speed of this jet water has huge striking energy and can complete different types of tasks. The technology of using this highly concentrated water jet to complete various pipeline dredging and desilting operations is called "high-pressure pipeline dredging".
Product Parameters
Dimension(LxWxH) |
9200x2500x3500(mm) |
Total Mass |
18000kg |
Rated Payload |
5245kg |
Curb Weight |
12560kg |
Passenger |
3 |
Approach/Departure Angle |
17/10 |
The Parameters of Chassis |
Model |
SX1250 |
Driving Type |
4X2 left/right hand drive |
Wheelbase |
4700 mm |
Gearbox |
nine speed forward and one reverse, manual |
Tire |
10.00R20 18PR |
The Number of Tires |
6+1(spare tire) |
Front/Rear Suspension |
1345/3055 |
The Parameters of Engine |
Rated Power |
220Hp |
Fuel Type |
Diesel oil |
Displacement/Capacity |
8900ml |
Emission Standard |
Euro2/Euro3/Euro4/Euro5/Euro6 |
Cylinder |
Straight/6/intercooling |
The Parameters of Equipment |
Tank Capacity |
10000 Liers |
Volume of Tank |
Water:4000 Liters, Sewage:6000 Liters |
Vacuum Pump Rotation Speed |
Speed 800r/m-1400r/m |
Max. Suction Lift |
>7m |
Vacuum |
>500mmHg |
Time for full suction |
<5min |
Common Accessories |
Vacuum pump, ball valve, oil cylinder for rear cap, oil cylinder for dumping, pressure meter, window for showing liquid level, lock system for rear cap, four-way valve, moisture separator, sprinkler (optional), alarm for full suction (optional). |
Company Profile
FAQ
Q1: Are you manufacturer or trading company?
A: We are direct manufacturer with more than 8 years' experience.
Q2: What is the lead time?
A: Normally it will take 20-45 working days after getting down payment.
Q3: How should I pay for you if I place order to you?
A: We prefer T/T, 30%-50% as deposit, balance before shipment, L/C is also acceptable and negotiable.
Q4: If I do not like the color, could I change the color?
A: Yes, most of our trucks have standard colors, if all colors could not meet your needs; we could customize by your request.
Q5: Can you supply the spare parts of this truck?
A: Yes, We can supply the spare parts for all the trucks we selling. We have spare parts department professional for this. Once you need spare parts we can supply immediately.
Q6: Do you have oversea service?
A: When you have some problems which you cannot solve, we will arrange our engineers to your country to help you.
Q7: How about your product quality?
A: All our spare parts are from the original manufacturers, the quality is 100% guaranteed.